Search results for " sheets"

TITAFORM - Precision Hot Forming, development of innovative hot-forming processes of aeronautical components in Ti-alloy with low buy/fly ratio: an I…

2012

In the paper the description of the project TITAFORM is provided. The project has been financed on the call "PON Linea 1" of the Italian government and represents an effective example of cooperation between academy and industry. The project is focused on the beta forging and hot stretch forming operations of titanium alloys. �� 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Carbon Stocks in Peri-Urban Areas: A Case Study of Remote Sensing Capabilities

2014

Peri-urban areas are the extension of cities into contiguous areas, where households and farms coexist. Carbon stocks (CSs) assessment, a concept here extended to urban features, has not yet been studied in depth over peri-urban areas due to uncertainties in such CSs quantification, level of detail required about construction materials, and the high spatial variability of those stocks. Remote sensing (RS)-based techniques have been successfully utilized in urban areas for assessing phenomena such as soil sealing, sprawl patterns, and dynamics of surface imperviousness, especially focusing on land cover classification at high to medium spatial scales. Over the floodplain study area of Emilia…

Deformation and mixing of coexisting shapes in neutron-deficient polonium isotopes

2015

Coulomb-excitation experiments are performed with postaccelerated beams of neutron-deficient Po196,198,200,202 isotopes at the REX-ISOLDE facility. A set of matrix elements, coupling the low-lying states in these isotopes, is extracted. In the two heaviest isotopes, Po200,202, the transitional and diagonal matrix elements of the 2+1 state are determined. In Po196,198 multistep Coulomb excitation is observed, populating the 4+1,0+2, and 2+2 states. The experimental results are compared to the results from the measurement of mean-square charge radii in polonium isotopes, confirming the onset of deformation from Po196 onwards. Three model descriptions are used to compare to the data. Calculati…

Quadrupole deformation of Xe-130 measured in a Coulomb-excitation experiment

2020

Physical review / C 102(5), 054304 (2020). doi:10.1103/PhysRevC.102.054304

Mechanical Behavior of Steel Fiber-Reinforced Concrete Beams Bonded with External Carbon Fiber Sheets

2017

This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip-off failure of the concrete cover. The CFRP sheets were fixed to the concrete surface by epoxy adhesive as well as combined with various configurations of small-diameter steel pins for mechanical fastening to form a hybrid connection. Such hybrid jointing techniques were found to be particularly adva…

Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets

2007

The effectiveness of external wrapping with fiber-reinforced polymer for enhancing the curvature ductility of lightly reinforced concrete members is investigated. Referring to members with circular transverse cross sections, the performances in terms of both strength and ductility capacities are analyzed, and the predictive reliability of two different recent constitutive models, available in the literature and able to take into account the softening behavior of confined concrete, is checked. A parameter characterizing the effectiveness of the confining wrapping is proposed, and characteristic values are suggested. Moreover, referring to ductility increases due to confinement effects, a com…

Laser-assisted nuclear decay spectroscopy of Au-176,Au-177,Au-179

2021

ispartof: PHYSICAL REVIEW C vol:104 issue:2 status: published

Experimental and numerical analysis on post welding formability of FSWed AZ31 magnesium alloy thin joints obtained using a "Pinless" tool configurati…

2012

The post welding formability of friction stir welded AZ31 magnesium alloy thin sheets (1.5 mm thick), obtained using a “pinless” tool configuration, was widely investigated by means of the hemispherical punch method at 350°C, with a constant crosshead speed of 0.1 mm/s. The results were compared with those obtained on the base material. It has shown that formability of the joints is lower than the one of the base material. The experimental work was supported by a numerical investigation based on FEM in order to highlight the material flow occurring during the welding process. Additionally, hemispherical punch tests were simulated starting from the calculated conditions, in terms of accumula…

Experimental and numerical analysis on FSWed magnesium alloy thin sheets obtained using “pin” and “pinless” tool

2012

Investigation on Application of Basalt Materials as Reinforcement for Flexural Elements of Concrete Bridges

2015

Basalt polymers are rather new materials for civil engineering; therefore, identification of peculiarities and limitations of application of such polymers in concrete structures (particularly bridges) is of vital importance. This paper experimentally investigates deformation behaviour and cracking of flexural elements, which are predominant parameters governing serviceability of the bridges. Unlike a common practice, the present study is not limited by the analysis of concrete beams reinforced with the polymer bars; it also considers effectiveness of basalt fibre reinforced polymer sheets for repairing the beams. The analysis has revealed that a combination of the high strength and elastici…